Custom made solutions offering choice for wire length
The 8-pole, A-coded M12 panel mount connectors fpr panel installations in protection class IP67 particularly fulfills the requirements for the reliable connection and the interference-free data transmission. This is achieved through a safe signal contacting through twisted machined crimp contacts and the full-metal housing. This way, custom made device interface solutions can be implemented due to the free choice of the wire length.
Technical features
– Very compact outer dimensions
– Effective shielding due to full-metal housing
– Insulator with A-coding
– Machined crimp contacts for a safe contact
– Crimp contacts: i.e. signal: AWG 26-28 /Power: AWG 22-24
– Easy and fast installation due to crimp snap-in contacts and pre-mounted assembly with a few single parts
– Fault-free wire-termination due to contact holder with coding
|
Technische Daten/Technical data |
|
|
Steckverbinder |
M12 gemäß/acc. to IEC 61076-2-101 |
|
Codierungs-Polzahl/Coding pin number |
A-8 |
|
Kontaktzahl/Number of contacts |
8 |
|
Strombelastbarkeit/Current rating |
2 A |
|
Bemessungsspannung/Nominal voltage |
30 V AC |
|
Durchgangswiderstand/Contact resistance |
≤ 5 mΩ |
|
Isolationswiderstand/Insulation resistance |
≥ 100 MΩ |
|
Anschlussart Einzelader/Termination single wire |
Gedrehte Crimp snap-in Kontakte/ Machined crimp snap-in contacts |
|
Aderquerschnitt/Wire size |
0,08-0,14 mm2 (AWG 26-28)/0,25–0,34 mm2 (AWG 22-24) |
|
Schutzart /IP protection |
IP 67 (nur schraubverriegelt/only screw-locked) |
|
Temperaturbereich/Temperature range |
-40 bis/to +85°C |
|
Mechanische Lebensdauer/Mechanical lifetime |
≥ 200 Steckzyklen/mating cycles |
|
Schock und Vibrationssicherheit/ Shock and vibration proofness |
DIN EN 61373 Kategorie 1, Klasse B/ DIN EN 61373 Category 1, class B |
|
Materialien/Materials |
|
|
Gehäuse/Housing |
Cu-Legierung vernickelt/Cu alloy Ni plated |
|
Isolierkorper +Kontakthalter/ Insulator + contact holder |
Thermoplast I2/F2 gemäß NFF-16-101/102 und HL3 gemäß R22/R23 EN 45545-2 I2/F2 according to NFF-16-101/102 and HL3 according to R22/R23 EN 45545-2 |
|
Material/Material |
Cu-Legierung/Cu alloy |
|
Oberflache/Plating |
Ni/Au |
|
Dichtungen/Sealings |
Elastomer |
|
Gewinde Wandbefestigung/Panel mount thread |
M16 x 1,5 |
|
Gehäuse Außen-6kt/Wrench size housing |
SW 19/AF 19 |
|
Außenabmessungen/Outer dimensions in mm |
Ø21 x 21 |
Get In Touch
© Lightning 2024. All Rights Reserved.